Thursday, May 3, 2012

5 de Mayo

With Cinco de Mayo just around the corner I thought I would be remiss if I didn't share any of my a favorite Mexican recipes. I know around here we will be breaking out our Frida Kahlo and paper flowers.  I will use any excuse to celebrate!!!



Here is my 411 on Tortillas!!!
I promise you can do it.  I taught Sophia's four year old class, and they were champs!

UNO: INGREDIENTS
All you need is flour, baking powder, salt, manteca (animal lard preferred), and warm water.


MIX TOGETHER
3.5 cups of Flour
1tsp Salt
1/2 tsp of Baking Powder
1/2 cup of Manteca (sounds better then lard)


THEN
ADD 1.5 cups of warm water and form small round balls. EVEN BABIES could do it!! 

Cover your bowl of dough with a warm wet towel, then begin to roll out your tortillas.
I cook all my tortillas on a COMAL (iron skillet). Cook 5 seconds on each side.  You will be ready in about an hour with three dozen tortillas.  Add your favorite taco filling and your guests will be sure to be more than pleased to be celebrating CINCO de MAYO.


BESOS,


MEL

Wednesday, May 2, 2012

Reupholstering a Couch: Part 2-- The Dirty Work



We did it!!  Mel and I had the best time last week working together to give her pretty, abused couch a fresh new look.  If you've ever wished you could replace the upholstery on a sofa, chair or headboard but were shocked at the costs, we hope we can inspire you with this guide for reupholstery.

This little guide can be helpful for you if you are considering taking on a project of your own, but each piece of furniture will require a slightly different approach. Mel and I are by no means professional upholsterers, but we are willing to spend some time and a lot of elbow grease on a project in order to save some money and make something our own.

Everything I consider reupholstering myself needs to be doable for non-professionals like us-- in other words not too complicated.  You should probably steer clear of attempting to recover anything of special value or expense, since you don't want to risk damaging it somehow with your less-than-perfect attempts at the job.  And finally, stick to affordable fabric choices, just in case you really do botch the job.  Not that you would:)

Now, I know that paying a professional to reupholster a piece of furniture can get expensive, but don't forget there's a reason for all that money.  After tackling just a few projects myself, I can promise you that the work is hard and sometimes tedious--when you're in the middle of removing your millionth staple or upholstery tack you realize how much these jobs really are worth.

But if you have a piece of furniture that's got good bones and isn't in need of major structural repair, then give it a go!  One thing we can promise you is that if you do, you will be bursting with pride and a sense of accomplishment.


With that in mind, let's get started! To begin a project like this, you'll need a few basic tools.  I love Singer's Upolstery Basics book, and now they've come out with an updated "Plus" edition.  It takes you step by step through the process and provides detailed instructions for upholstering everything from a sofa to dining chairs to ottomans.



For stripping the old fabric, staples and nails you will also need:
1. Standard flat head screwdriver
2. Needle nose pliers
3. Tiny flat head screwdriver
4. Bowl for collecting the millions of tacks and staples
(not pictured: Camera)


Step 1: Take lots of photos, drawings, and notes before you begin.


It's so important to remember when you tackle a project like this is to take lots of photos of how the piece is already constructed.  How is each piece of fabric layered and attached to the sofa?  Trust me, you will be so glad you did!  Once you've stripped it, you won't want to rely just on your memory of how to put it all back together.


For example, here we took a photo of how the top roll section was attached to the frame over the backrest part of the couch.



Measure everything carefully, and it's best to measure twice!  Unless you have lots of extra fabric, you don't want to risk cutting out the pieces wrong and running out.  It happend to me on this project where I measured carelessly on one piece and cut it too short, but thankfully we were able to salvage it without recutting the whole section.





Step 2: Remove all cording and trim.



This is where some of the fun begins.  Use the standard sized screw driver to pry the cording or welting loose at the beginning point and then just yank it off using your pliers.  Often your welting will be attached using glue, but sometimes you will find it was sewn to a piece of fabric or hand sewn at the end.  Don't forget to make a note of how it was originally assembled to keep you from panicking when it's time to put it all back together!  



Once your welting is off, you'll be able to see the many staples and nails that were used to attach your old fabric.  Now comes the manual labor!  Using your flat head screw drivers to pry up underneath your nails and staples, get a section started and then come back with your pliers to pry them out.  To save yourself some energy, use the frame for leverage whenever you can to help you with the work of removing the staples.  They'll come out faster this way with less work on your part.
via LGN

Try to preserve the shape of the pieces of fabric you remove rather than ripping them up, since they can provide a pattern for you later when fitting the new pieces to your furniture.

Whew!  Stay tuned for Friday's installment on how to reupholster a sofa, plus the after photos!!

Liza

Tuesday, May 1, 2012

Long Story Short

A month ago Liza asked if she could visit for an entire week, I of course said YES!!! In my mind I had a project for the two of us. Liza has a history of visiting and taking on a bit of a project, building me new shelves, painting cabinets, you get the idea. When I asked if she was willing to take on a couch and she said YES, I knew this was my chance to redeem my sad looking sofa. 


Before we got started I did do a price check on the cost of reupholstery.  I wanted to make sure this project was worth the labor. I checked in with Jenny Komenda at LGN, and she suggested Mr. Upholstery here in NYC.  He quoted me $1,350.00 for the job.  I then checked in with my local upholsterer on 14th and 2nd Ave,  and he quoted me $2,500.00 for the entire job, plus the cost in fabric.  These were way out of my budget.  So, I knew the project was worth tackling. 

When thinking about which fabric to choose, I knew the fabric must be stain resistant and child proof.  I looked into several types of fabrics that would meet these qualities. I also knew I did not want to buy a patterned fabric, since this is my first time at a sofa, and I knew that would add to the level of difficulty. A friend of mine suggested fabric from Maharama.  I looked for a fabric with a color that pops, since there is already a lot of brown in my living room. In the end I bought  a blue called "Ginger" at 15 dollars a yard, stain resistant.










For 16 yards in fabric the total came to $274.99, right within my budget. 

Before getting started, Liza and I made sure we had all our materials ready and on hand. We purchased this fabulous measuring board, new foam for my cushions, Magna Tac, upholstery thread, tacks, staples, a curved needle, and Singer's book, Upholstery Guide. We were ready to go and still well within budget. 

Many people choose to reupholster for sentimental reasons. In this case, I was looking to stay within a budget and hoping for something more modern in the room.  Since our sofa was made in the 60s, the lines and great construction of the piece were worth restoring. In addition, I just knew this sofa just needed a bit of a lift to serve us for the next 40 years!


Stay tuned for Liza's tutorial maƱana.


xo,


Mel

Related Posts Plugin for WordPress, Blogger...
Related Posts Plugin for WordPress, Blogger...
Related Posts Plugin for WordPress, Blogger...